Explanation: The = operator is used to assign a value to a variable in C. The == operator is used for comparison.
Explanation: In C, the multiplication operator (*) has higher precedence than the addition operator (+), so the expression evaluates to 5 + (3 * 2) = 5 + 6 = 11.
Explanation: The ++ operator is used to increment the value of a variable by 1 in C.
Explanation: The conditional operator in C has the syntax condition ? expr1 : expr2, which evaluates expr1 if the condition is true, and expr2 if the condition is false.
Explanation: The && operator is used for logical AND in C, which returns true if both operands are true.
Explanation: The % operator in C is the modulus operator, which returns the remainder of the division. 10 % 3 equals 1 because 10 divided by 3 leaves a remainder of 1.
Explanation: The parentheses operator (()) has the highest precedence in C, which allows expressions within parentheses to be evaluated first.
Explanation: The expression (a > b) && (b > c) evaluates to (5 > 3) && (3 > 1), which is true && true, resulting in true.
Explanation: The | operator is used for bitwise OR in C, which performs the OR operation on corresponding bits of two operands.
Explanation: The ~ operator is the bitwise NOT operator in C, which inverts all bits of the operand. ~5 results in the binary inversion of 00000101 to 11111010, which is -6 in two’s complement representation.
Explanation: The + operator is used for addition in C, which sums the values of two operands.
Explanation: The – operator is used for subtraction in C, so 7 – 2 evaluates to 5.
Explanation: The * operator is used for multiplication in C, so 4 * 3 evaluates to 12.
Explanation: The / operator is used for division in C, which divides the value of the left operand by the value of the right operand.
Explanation: The / operator is used for division, so 10 / 2 evaluates to 5.
Explanation: The % operator is used to find the remainder of a division in C.
Explanation: The % operator returns the remainder of the division, so 15 % 4 evaluates to 3.
Explanation: Parentheses have the highest precedence, so (8 + 2) is evaluated first, resulting in 10. Then, 10 * 5 equals 40.
Explanation: The * operator has higher precedence than -, so the expression is evaluated as 10 – (3 * 2) = 10 – 6 = 4.
Explanation: In C, when both operands are integers, the / operator performs integer division, so 12 / 5 evaluates to 2.
Explanation: The * operator has higher precedence than + and -, so the expression is evaluated as 3 + (4 * 2) – 1 = 3 + 8 – 1 = 10.
Explanation: In C, the multiplication (*) and modulus (%) operators have higher precedence than addition (+) and subtraction (-).
Explanation: The % operator returns the remainder of the division, so 14 % 3 evaluates to 2.
Explanation: In C, the / and * operators have the same precedence and are evaluated from left to right, so 9 / 4 equals 2 (integer division), and 2 * 3 equals 6.
Explanation: Parentheses have the highest precedence, so (5 + 3) is evaluated first, resulting in 8. Then, 8 % 4 equals 0.
Explanation: The / operator has higher precedence than +, so the expression is evaluated as 7 + (5 / 2) = 7 + 2 = 9.
Explanation: The / operator has higher precedence than -, so the expression is evaluated as 18 – (4 / 2) = 18 – 2 = 16.
Explanation: The * and / operators have higher precedence than +, so the expression is evaluated as 10 + (2 * 5) / 2 = 10 + 10 / 2 = 10 + 5 = 15.
Explanation: The / and * operators have higher precedence than +, so the expression is evaluated as (8 / 4) + (6 * 3) = 2 + 18 = 20.
Explanation: The % operator has higher precedence than +, so the expression is evaluated as (8 % 3) + 1 = 2 + 1 = 3.
Explanation: The / and * operators have higher precedence than -, so the expression is evaluated as (20 / 4) * 2 – 3 = 5 * 2 – 3 = 10 – 3 = 7.
Explanation: The * and % operators have the same precedence and are evaluated from left to right, so the expression is evaluated as (4 * 2) % 3 = 8 % 3 = 2.
Explanation: Parentheses have the highest precedence, so (6 / 2) is evaluated first, resulting in 3. Then, the expression is evaluated as 7 + 3 * 3 = 7 + 9 = 16.
Explanation: Parentheses have the highest precedence, so (2 + 3) is evaluated first, resulting in 5. Then, the expression is evaluated as 5 * 5 – 4 / 2 = 25 – 2 = 23.
Explanation: Parentheses have the highest precedence, so (9+ 3) is evaluated first, resulting in 12. Then, the expression is evaluated as 12 / 3 * 2 = 4 * 2 = 8.
Explanation: The * and / operators have higher precedence than + and -, so the expression is evaluated as 6 – 2 + (3 * 4) / 2 = 6 – 2 + 6 = 4 + 6 = 10.
Explanation: The % operator has higher precedence than +, so the expression is evaluated as (15 % 6) + 2 = 3 + 2 = 5.
Explanation: The * and % operators have higher precedence than +, so the expression is evaluated as 2 + (3 * 4) % 5 = 2 + 12 % 5 = 2 + 2 = 4.
Explanation: The / and % operators have higher precedence than -, so the expression is evaluated as (8 / 2) – (5 % 3) = 4 – 2 = 2.
Explanation: The * and / operators have higher precedence than -, so the expression is evaluated as 7 – (5 * 2) / 4 = 7 – 10 / 4 = 7 – 2 = 5.
Explanation: The == operator is used to check if two values are equal in C.
Explanation: The > operator checks if the left operand is greater than the right operand, so 5 > 3 evaluates to true.
Explanation: The != operator is used to check if two values are not equal in C.
Explanation: The <= operator checks if the left operand is less than or equal to the right operand, so 7 <= 7 evaluates to true.
Explanation: The < operator is used to check if the left operand is less than the right operand in C.
Explanation: The == operator checks if two values are equal, so 9 == 10 evaluates to false.
Explanation: The <= operator checks if the left operand is less than or equal to the right operand, so 10 <= 10 evaluates to true.
Explanation: The >= operator checks if the left operand is greater than or equal to the right operand, so 4 >= 6 evaluates to false.
Explanation: The >= operator is used to check if the left operand is greater than or equal to the right operand in C.
Explanation: The != operator checks if two values are not equal, so 15 != 20 evaluates to true.
Explanation: The != operator checks if two values are not equal, so 3 != 3 evaluates to false.
Explanation: The < operator checks if the left operand is less than the right operand, so 12 < 9 evaluates to false.
Explanation: The <= operator is used to check if two values are equal or if the left operand is less than the right operand in C.
Explanation: The && operator is the logical AND operator, so 8 > 2 && 3 < 4 evaluates to true && true, resulting in true.
Explanation: The && operator is the logical AND operator, so 10 == 10 && 5 != 6 evaluates to true && true, resulting in true.
Explanation: The == operator checks if two values are equal, so 9 == 9 evaluates to true.
Explanation: The || operator is the logical OR operator, so 2 < 3 || 4 > 5 evaluates to true || false, resulting in true.
Explanation: The > operator is used to check if the left operand is greater than the right operand in C.
Explanation: The <= operator checks if the left operand is less than or equal to the right operand, so 11 <= 10 evaluates to false.
Explanation: The < operator checks if the left operand is less than the right operand, so 3 < 2 evaluates to false.
Explanation: The && operator is the logical AND operator, so 6 >= 3 && 4 < 2 evaluates to true && false, resulting in false.
Explanation: The >= operator checks if the left operand is greater than or equal to the right operand, so 9 >= 9 evaluates to true.
Explanation: The || operator is the logical OR operator, so 14 != 14 || 7 == 7 evaluates to false || true, resulting in true.
Explanation: The <= operator is used to check if the left operand is less than or equal to the right operand in C.
Explanation: The && operator is the logical AND operator, so 13 > 8 && 4 == 4 evaluates to true && true, resulting in true.
Explanation: The != operator checks if two values are not equal, so 8 != 9 evaluates to true.
Explanation: The || operator is the logical OR operator, so 5 < 2 || 7 > 3 evaluates to false || true, resulting in true.
Explanation: The && operator is the logical AND operator, so 4 >= 4 && 3 != 3 evaluates to true && false, resulting in false.
Explanation: The != operator is used to check if two values are not equal in C.
Explanation: The && operator is the logical AND operator, so 18 <= 20 && 10 > 5 evaluates to true && true, resulting in true.
Explanation: The && operator is used to represent logical AND in C.
Explanation: The || operator is used to represent logical OR in C.
Explanation: The ! operator is used to represent logical NOT in C.
Explanation: The expression 5 > 3 evaluates to true, and the ! operator negates it, resulting in false.
Explanation: The expression 2 < 1 is false, and 3 > 2 is true. Since || is logical OR, the entire expression evaluates to true.
Explanation: The expression 4 > 2 is true, and 3 <= 1 is false. Since && is logical AND, the entire expression evaluates to false.
Explanation: The ! operator is used to negate a logical expression in C.
Explanation: The expression 7 == 5 is false, and the ! operator negates it, resulting in true.
Explanation: The expression 5 <= 5 is true, and the ! operator negates it, resulting in false.
Explanation: The expression 8 < 6 is false, and 3 == 3 is true. Since || is logical OR, the entire expression evaluates to true.
Explanation: The && operator returns false if at least one of its operands is false; it only returns true if both operands are true.
Explanation: The expression 5 != 5 is false, and the ! operator negates it, resulting in true.
Explanation: The || operator is used to combine multiple conditions where at least one must be true in C.
Explanation: The expression 4 < 2 is false, and 2 > 1 is true. Since || is logical OR, the expression 4 < 2 || 2 > 1 evaluates to true, and the ! operator negates it, resulting in false.
Explanation: The expression 2 >= 2 is true, and 1 < 0 is false. Since || is logical OR, the entire expression evaluates to true.
Explanation: The expression 9 > 3 is true, and 2 == 2 is true. The ! operator negates 2 == 2 to false. Since && is logical AND, the entire expression evaluates to false.
Explanation: The && operator is used to check if both conditions are true in C.
Explanation: The expression 6 <= 6 is true, and 3 > 4 is false. Since || is logical OR, the expression 6 <= 6 || 3 > 4 evaluates to true, and the ! operator negates it, resulting in false.
Explanation: The expression 1 != 1 is false, and the ! operator negates it, resulting in true.
Explanation: The expression 10 != 10 is false, and 5 < 3 is false. Since || is logical OR, the entire expression evaluates to false.
Explanation: The ! operator represents logical NOT in C.
Explanation: The expression 7 <= 5 is false, and 3 == 3 is true. The ! operator negates 2 > 1 to false. Since && has higher precedence than ||, the expression 3 == 3 && !(2 > 1) evaluates to true && false, resulting in false. The entire expression then evaluates to false || false, resulting in false.
Explanation: The && operator is used to combine multiple conditions where both must be true in C.
Explanation: The expression 8 >= 8 is true, and 4 != 4 is false. Since && is logical AND, the expression 8 >= 8 && 4 != 4 evaluates to true && false, resulting in false. The ! operator negates it, resulting in true.
Explanation: The expression 6 == 6 is true, and 7 != 7 is false. Since && is logical AND, the entire expression evaluates to true && false, resulting in false.
Explanation: The expression 5 < 2 is false, and 3 > 1 is true. Since && is logical AND, the entire expression evaluates to false.
Explanation: The || operator is used to combine multiple conditions where at least one must be true in C.
Explanation: The expression 4 > 2 is true, and 1 < 3 is true. Since && is logical AND, the expression 4 > 2 && 1 < 3 evaluates to true. The ! operator negates it, resulting in false.
Explanation: The expression 3 > 4 is false, and 2 == 2 is true. Since || is logical OR, the entire expression evaluates to true.
Explanation: The expression 6 != 6 is false, and 5 > 1 is true. Since || is logical OR, the expression 6 != 6 || 5 > 1 evaluates to false || true, resulting in true. The ! operator negates it, resulting in false.
Explanation: The & operator is used to perform a bitwise AND operation in C.
Explanation: The | operator is used to perform a bitwise OR operation in C.
Explanation: The ^ operator is used to perform a bitwise XOR (exclusive OR) operation in C.
Explanation: The ~ operator is used to invert all the bits (bitwise NOT) in C.
Explanation: The binary representation of 5 is 101 and 3 is 011. The bitwise AND of these is 001, which is 1 in decimal.
Explanation: The binary representation of 5 is 101 and 3 is 011. The bitwise OR of these is 111, which is 7 in decimal.
Explanation: The binary representation of 5 is 101 and 3 is 011. The bitwise XOR of these is 110, which is 6 in decimal.
Explanation: The << operator is used to shift bits to the left in C.
Explanation: The >> operator is used to shift bits to the right in C.
Explanation: The bitwise NOT (~) inverts all the bits of 5 (00000101 in binary becomes 11111010 in binary, which is -6 in two’s complement representation).
Explanation: The binary representation of 6 is 110. Shifting left by 1 bit gives 1100, which is 12 in decimal.
Explanation: The binary representation of 6 is 110. Shifting right by 1 bit gives 011, which is 3 in decimal.
Explanation: The ^ operator can be used to toggle specific bits in C.
Explanation: The binary representation of 8 is 1000 and 4 is 0100. The bitwise AND of these is 0000, which is 0 in decimal.
Explanation: The binary representation of 9 is 1001 and 4 is 0100. The bitwise OR of these is 1101, which is 13 in decimal.
Explanation: The binary representation of 15 is 1111 and 5 is 0101. The bitwise XOR of these is 1010, which is 10 in decimal.
Explanation: The binary representation of 4 is 100. Shifting left by 2 bits gives 10000, which is 16 in decimal.
Explanation: The binary representation of 32 is 100000. Shifting right by 3 bits gives 100, which is 4 in decimal.
Explanation: The bitwise NOT (~) inverts all the bits of 0 (00000000 in binary becomes 11111111 in binary, which is -1 in two’s complement representation).
Explanation: The bitwise OR operation x | 1 sets the lowest bit of x to 1.
Explanation: The binary representation of 3 is 11 and 2 is 10. The bitwise AND of these is 10, which is 2 in decimal.
Explanation: The bitwise AND operation (&) can be used with a mask to clear specific bits to 0 in C.
Explanation: The binary representation of 10 is 1010 and 5 is 0101. The bitwise OR of these is 1111, which is 15 in decimal.
Explanation: The binary representation of 7 is 0111 and 2 is 0010. The bitwise XOR of these is 0101, which is 5 in decimal.
Explanation: The bitwise AND operator (&) can be used with a mask to check if a specific bit is set in C.
Explanation: The binary representation of 14 is 1110 and 7 is 0111. The bitwise AND of these is 0110, which is 6 in decimal.
Explanation: The binary representation of 1 is 1. Shifting left by 3 bits gives 1000, which is 8 in decimal.
Explanation: The binary representation of 16 is 10000. Shifting right by 2 bits gives 100, which is 4 in decimal.
Explanation: The bitwise NOT operation (~) flips all the bits of the variable x.
Explanation: The binary representation of 8 is 1000 and 7 is 0111. The bitwise AND of these is 0000, which is 0 in decimal.
Explanation: The = operator is used to assign a value to a variable in C.
Explanation: The expression x += 5 adds 5 to the current value of x, resulting in 15.
Explanation: The -= operator subtracts the right-hand operand from the left-hand operand and assigns the result to the left-hand operand.
Explanation: The expression x *= 3 multiplies the current value of x by 3, resulting in 12.
Explanation: The /= operator divides the left-hand operand by the right-hand operand and assigns the result to the left-hand operand.
Explanation: The expression x %= 3 calculates the remainder of x divided by 3, resulting in 1.
Explanation: The &= operator performs a bitwise AND operation on the left-hand operand with the right-hand operand and assigns the result to the left-hand operand.
Explanation: The binary representation of 5 is 101 and 2 is 010. The bitwise OR operation results in 111, which is 7 in decimal.
Explanation: The ^= operator performs a bitwise XOR operation on the left-hand operand with the right-hand operand and assigns the result to the left-hand operand.
Explanation: The binary representation of 3 is 11. Shifting left by 2 bits gives 1100, which is 12 in decimal.
Explanation: The >>= operator shifts the bits of the left-hand operand to the right by the number of positions specified by the right-hand operand and assigns the result to the left-hand operand.
Explanation: The expression x += x adds the value of x to itself, resulting in 16.
Explanation: The *= operator multiplies the left-hand operand by the right-hand operand and assigns the result to the left-hand operand.
Explanation: The expression x /= 2 divides the current value of x by 2, resulting in 10.
Explanation: The %= operator calculates the remainder of the division of the left-hand operand by the right-hand operand and assigns the result to the left-hand operand.
Explanation: The binary representation of 6 is 110 and 3 is 011. The bitwise AND operation results in 010, which is 2 in decimal.
Explanation: The binary representation of 7 is 0111 and 4 is 0100. The bitwise XOR operation results in 0011, which is 3 in decimal.
Explanation: The binary representation of 5 is 101. Shifting left by 1 bit gives 1010, which is 10 in decimal.
Explanation: The binary representation of 16 is 10000. Shifting right by 2 bits gives 100, which is 4 in decimal.
Explanation: The &= operator performs a bitwise AND operation on the left-hand operand with the right-hand operand and assigns the result to the left-hand operand.
Explanation: The binary representation of 2 is 0010 and 8 is 1000. The bitwise OR operation results in 1010, which is 10 in decimal.
Explanation: The |= operator performs a bitwise OR operation on the left-hand operand with the right-hand operand and assigns the result to the left-hand operand.
Explanation: The expression x -= 3 subtracts 3 from the current value of x, resulting in 6.
Explanation: The <<= operator shifts the bits of the left-hand operand to the left by the number of positions specified by the right-hand operand and assigns the result to the left-hand operand.
Explanation: The expression x /= x divides the current value of x by itself, resulting in 1.
Explanation: The XOR operation (x ^= x) with the same variable will result in all bits being set to 0, regardless of the initial value of x. Therefore, the result will be 0.
Explanation: The sizeof operator is used to determine the size of a variable or data type in C.
Explanation: The comma operator evaluates multiple expressions and returns the value of the last expression.
Explanation: The ternary operator (?:) evaluates a condition and returns one of two values depending on whether the condition is true or false.
Explanation: When used as the address-of operator, the & operator returns the memory address of a variable.
Explanation: The sizeof(int) returns the size of the int data type in bytes.
Explanation: The comma operator separates function arguments in a function call.
Explanation: The ternary operator (?:) requires two conditions, followed by a true and false expression.
Explanation: The & operator, when used as the address-of operator, is used to access memory addresses.
Explanation: The sizeof operator returns the size of a data type in bytes.
Explanation: The sizeof(float) returns the size of the float data type in bytes.
Explanation: The ternary operator (?:) evaluates three expressions: a condition followed by a true and false expression.
Explanation: The sizeof(double) returns the size of the double data type in bytes.
Explanation: The comma operator, when used in a declaration, declares multiple variables of the same type.
Explanation: The sizeof operator returns the size of the array multiplied by the number of elements in bytes.
Explanation: The sizeof(char) returns the size of the char data type in bytes.
Explanation: The ternary operator (?:) returns a single value based on a condition.
Explanation: The & operator, when used as the address-of operator, is used to access memory addresses.
Explanation: The sizeof operator returns the size of the pointer in bytes.
Explanation: The comma operator, when used in a declaration, declares multiple variables of the same type.
Explanation: Operator precedence determines the order in which operators are evaluated in expressions.
Explanation: Increment (++) has the highest precedence among the given options.
Explanation: Assignment (=) has the lowest precedence among the given options.
Explanation: The addition operator (+) has left-to-right associativity in C.
Explanation: The ternary operator (?:) has left-to-right associativity in C.
Explanation: Operator associativity determines the order in which operators of the same precedence are evaluated.
Explanation: Assignment (=) has right-to-left associativity in C.
Explanation: Logical AND (&&) has higher precedence than logical OR (||) in C.
Explanation: The unary prefix increment operator (++) has left-to-right associativity in C.
Explanation: The pointer dereference operator (*) does not have associativity as it’s a unary operator.
int result = 5 + 7 * 3;
Explanation: According to the operator precedence rules in C, multiplication (*) has higher precedence than addition (+), so 7 * 3 is evaluated first, resulting in 21, then added to 5 to give the final result of 26.
Explanation: In C, division between two integers truncates any fractional part, so 12 divided by 5 results in 2.
int main() {
int a = 5;
int b = 2;
printf("%d\n", a / b);
return 0;
}
Explanation: The integer division of 5 by 2 results in 2, as any fractional part is truncated.
Explanation: The modulo operator (%) returns the remainder of the division operation. So, 5 % 3 is 2. Then, 2 * 2 is 4.
int main() {
int x = 10;
int y = ++x;
printf("%d\n", y);
return 0;
}
Explanation: The pre-increment operator (++x) increments the value of x by 1, so y will be assigned the value of the incremented x, which is 11.
Explanation: The equality operator (==) returns 1 if the condition is true and 0 if the condition is false. Here, 5 is not equal to 3, so the result is 0.
int main() {
int x = 5, y = 10, z = 5;
printf("%d\n", x == z);
return 0;
}
Explanation: The equality operator (==) checks if the values on both sides are equal. Here, x and z both have the value 5, so the expression evaluates to true, which is represented as 1.
Explanation: The expression !(5 == 3) evaluates to true because 5 is not equal to 3. The logical NOT operator (!) negates the result, so the final result is 1.
int main() {
int x = 5, y = 10;
printf("%d\n", x > y);
return 0;
}
Explanation: The greater than operator (>) checks if the left operand is greater than the right operand. Here, x is not greater than y, so the result is false, represented as 0.
Explanation: The greater than or equal to operator (>=) returns true (1) if the left operand is greater than or equal to the right operand. Here, 5 is equal to 5, so the result is 1.
int main() {
int x = 5, y = 10;
printf("%d\n", x != y);
return 0;
}
Explanation: The inequality operator (!=) returns true (1) if the operands are not equal. Here, x is not equal to y, so the result is 1.
Explanation: The logical AND operator (&&) returns true (1) if both operands are true. Here, both 5 and 3 are non-zero, so the result is 1.
int main() {
int x = 5, y = 0;
printf("%d\n", x && y);
return 0;
}
Explanation: In C, the logical AND operator (&&) returns false (0) if any of the operands are false. Here, y is 0, so the result is 0.
Explanation: The logical OR operator (||) returns true (1) if at least one of the operands is true. Here, both 5 and 3 are non-zero, so the result is 1.
int main() {
int x = 0, y = 0;
printf("%d\n", x || y);
return 0;
}
Explanation: In C, the logical OR operator (||) returns true (1) if at least one of the operands is true. Since both x and y are 0 (false), the result is 0.